SLT and ISDN Telephone Features 7-17
7.2 SLT and ISDN Telephone Features C
Call Forwarding — to CO Line
You can forward your incoming intercom calls to a CO line. The telephone number of
outside party must be pre-programmed.
Setting
1. Lift the handset.
2. Dial the feature number (710) and 6.
3. Dial the line access code (9 or 81 through 88).
4. Dial the phone number to which you wish to forward the call.
5. Dial #.
• You hear a confirmation tone and then a dial tone.
6. Hang up.
Conditions
• Up to sixteen digits (line access code is included) can be programmed.
• “Class of Service” programming determines the extension that can perform this
feature.
Programming References
• System Programming — Installation Manual
[504] Call Forwarding to CO Line
[601] Class of Service
1
2
3
line access code
4
phone number
5
6
To Next Page
Loading...
