Panasonic KX-TD816E - Page 460

Quick Reference 8-3
8 Quick Reference
❐ Charge Fee Reference
— Extension Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID Code.
•Dial 1 + extension number.
•Press SEL (S1) button.
•Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
•Press HOLD (END) button three times.
•Exit the programming mode.
— CO Line Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID code.
•Dial 2.
•Dial CO line number as follows.
- 01 - 08 : if connected to the KX-TD816
- 01 - 24 : if connected to the KX-TD1232
•Press SEL (S1) button.
•Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
•Press HOLD (END) button three times.
•Exit the programming mode.
— Account Code Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID Code.
•Dial 3 + location number
(01 through 40) .
•Press SEL (S1) button.
•Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
•Press HOLD (END) button three times.
•Exit the programming mode.
— Total Extension Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID Code.
•Dial 4.
•Press SEL (S1) button.
•Press the desired button (CLR or STORE),
if required.
•Press HOLD (END) button twice.
•Exit the programming mode.
— Total CO Line Charge Fee Reference
•Enter the programming mode.
•Dial 8.
•Enter ID Code.
•Dial 5.
•Press SEL (S1) button.
•Press the desired button (CLR or STORE),
if required.
•Press HOLD (END) button twice.
•Exit the programming mode.
— Total Account Code Charge Fee
Reference
•Enter the programming mode.
•Dial 8.
•Enter ID code.
•Dial 6.
•Press SEL (S1) button.
•Press the desired button (CLR or STORE),
if required.
•Press HOLD (END) button twice.
•Exit the programming mode.
— Account Code Set
•Enter the programming mode.
•Dial 8.
•Enter ID code.
•Dial 7 + location number (01 through 40).
•Press CLR (S2) button.
•Enter new account code.
•Press STORE button.
•Press HOLD (END) button twice.
•Exit the programming mode.