Panasonic KX-TD816E - Page 461

8-4 Quick Reference
8 Quick Reference
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
❐ Flexible Button Assignment
— Account Button
•Enter the programming mode.
•Press the desired Flexible button.
•Dial 6.
•Press STORE button.
•Exit the programming mode.
— Alert Button
•Enter the programming mode.
•Press the desired CO button.
•Dial 87.
•Press STORE button.
•Exit the programming mode.
— Conference (CONF) Button
•Enter the programming mode.
•Press the desired Flexible button.
•Dial 7.
•Press STORE button.
•Exit the programming mode.
— DSS Button
•Enter the programming mode.
•Press the desired CO or DSS button.
•Dial 1 + extension number.
•Press STORE button.
•Exit the programming mode.
— FWD/DND Button
•Enter the programming mode.
•Press the desired Flexible button.
•Dial 4.
•Press STORE button.
•Exit the programming mode.
— Group-CO (G-CO) Button
•Enter the programming mode.
•Press the desired CO button.
•Dial # + CO line group number (1 through
8).
•Press STORE button.
•Exit the programming mode.
— Hurry Up Button
•Enter the programming mode.
•Press the desired CO button.
•Dial 81 + extension number.
•Press STORE button.
•Exit the programming mode.
— Live Call Screening (LCS) Button†
•Enter the programming mode.
•Press the desired CO or DSS button.
•Dial 85.
•Press STORE button.
•Exit the programming mode.
— Live Call Screening (LCS) Cancel
Button
†
•Enter the programming mode.
•Press the desired CO or DSS button.
•Dial 86.
•Press STORE button.
•Exit the programming mode.
— Log-In/Log-Out Button
•Enter the programming mode.
•Press the desired CO button.
•Dial 80.
•Press STORE button.
•Exit the programming mode.
— Loop-CO (L-CO) Button
•Enter the programming mode.
•Press the desired CO button.
•Dial .
•Press STORE button.
•Exit the programming mode.
— Message Waiting (MESSAGE) Button
•Enter the programming mode.
•Press the desired CO or DSS button.
•Dial 3.
•Press STORE button.
•Exit the programming mode.