2.10 Starting the Hybrid IP-PBX
Installation Manual 137
2. Plug the DC connector of the AC adaptor into DC IN 1.
3. Plug the AC cord into the AC adaptor, and then plug the other end into an AC outlet.
4. Turn on the power switch. The RUN indicator will flash.
Notes
• For safety reasons, follow the procedures as indicated when turning on the Hybrid IP-PBX.
• For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of the AC adaptor.
AC Adaptor
DC Connector
DC IN 1
To Next Page
Loading...
