Panasonic Lumix DC-S1 User Manual

7. Drive/Shutter
126
Takes pictures continuously while the shutter button is pressed and held.
You can choose a burst setting which enables burst recording in high
image quality, [H], [M] or [L], or one which enables high-speed burst
recording, [ ] (6K/4K photo), to suit the recording conditions.
1
Set the drive mode dial to [ ]
(Burst Shot 1) or [ ] (Burst
Shot 2).
0 Configure the burst settings for each of
[ ] and [ ].
2
Select the burst rate.
≥ ¨ [ ] ¨ [ ] ¨ [Burst Shot
1 Setting]/[Burst Shot 2 Setting]
0
With the default settings, [H] is set for
[ ] and is set for [ ].
3
Close the menu.
≥Press the shutter button halfway.
4
Start recording.
0 Takes burst pictures while the shutter
button is pressed fully.
Taking Burst Pictures
For information about 6K/4K photo recording, refer to “6K/4K Photo
Recording”. (l 130)
[H] Takes high-speed burst pictures.
[M] Takes medium-speed burst pictures.
[L] Takes low-speed burst pictures.

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)