Panasonic Lumix DC-S1 - Adjusting the White Balance

9. White Balance/Image Quality
197

White Sets ([ ] to [ ])
Take pictures of a white object under the light source of the recording
location to adjust the white balance until it appears white.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
3
Aim the camera at a white object so that it appears inside the frame at
the center of the screen and then press or .
0
This will set the white balance and return you to the recording screen.

Color Temperatures ([ ] to [ ])
Set the numeric value for the white balance color temperature.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
0
The color temperature setting screen is displayed.
3
Press 34 to select the color temperature and then press or .
0
You can set the White Balance Bracket (Color Temperature) by rotating ,
or . (l 160)
Adjusting the White Balance
You can adjust the coloring even when the coloring you want to apply is not
produced by the selected white balance.
1
Press [WB].
0 You can set a color temperature from [2500K] to [10000K].
1
4
1
4
1
4
1
4