Panasonic Lumix DC-S1 User Manual

15. Wi-Fi/Bluetooth
390
Transferring Recorded Images
Automatically
You can automatically transfer recorded pictures to a smartphone as they
are taken.
Getting started:
0 Connect the camera to a smartphone by Bluetooth. (l 374)
1
Enable [Auto Transfer] on the
camera.
≥ ¨ [ ] ¨ [ ] ¨ [Bluetooth]
¨ [Auto Transfer] ¨ [ON]
0
If a confirmation screen is displayed on
the camera asking you to terminate the
Wi-Fi connection, select [Yes] to terminate it.
2
On the smartphone, select [Yes].
0 (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
0 The camera automatically makes a Wi-Fi connection.
3
Check the send settings on
the camera and then press
or .
0 To change the send setting, press
[DISP.]. (l 419)
0 The camera will enter a mode where it
can automatically transfer images and
[ ] will be displayed on the recording screen.
(If the settings are not displayed, then automatic image transfer is not
possible. Check the status of the Wi-Fi connection to the smartphone.)
Wi-FiBluetooth

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)