178
8. Metering/Exposure/ISO
Sensitivity
Type of optical measurement to measure brightness can be changed.
¨ [ ] ¨ [ ] ¨ Select [Metering Mode]
[Metering Mode]
(Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness on
the whole screen.
(Center-weighted)
Method used to perform measuring which focuses on
the center of the screen.
(Spot)
Method used to measure the
extremely small part around the
spot-metering target A.
(Highlight-
weighted)
Method used to perform measuring which focuses on
the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Metering Mode]
(l 279)
0 The standard value for correct exposure can be adjusted:
[] ¨ [ ] ¨ [Exposure Offset Adjust.] (l 328)
To Next Page
Loading...
