16. Connecting to Other Devices
433
Copying Images to a PC
Use “PHOTOfunSTUDIO” to copy recorded images to your PC.
Getting started:
0 Turn on the camera and PC.
0 Install “PHOTOfunSTUDIO” on PC. (l 430)
1
Connect the camera and PC with the USB connection
cable (C–C or A–C).
0 Plug in/out straight holding onto the plug.
(Inserting these at an angle may cause deformation or malfunction)
0 Do not connect the cable to the wrong terminals. This may cause a
malfunction.
0 If you are using a Mac, or in any situation where “PHOTOfunSTUDIO” cannot
be installed, refer to page 434.
0 AVCHD videos may not be imported correctly by copying the files or folders.
– For Windows, be sure to use “PHOTOfunSTUDIO” to import AVCHD
videos.
– For Mac, you can use “iMovie” to import AVCHD videos. Depending on the
recording quality, however, it may not be possible to import them.
(For details on “iMovie”, please contact Apple Inc.)
To Next Page
Loading...
