Panasonic Lumix DC-S1 User Manual

10. Flash
226
You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) to record using a wireless flash.
You can separately control the firing of three flash groups and the flash
attached to the hot shoe of the camera.

Placing a Wireless Flash
Place the wireless flash with its wireless sensor facing the camera.
Recording Using a Wireless Flash
Placement example
When C is placed to erase the
shadow in the background of the
subject that the flash groups A and B
will create
Placement range
When DMW-FL360L is attached
0 The placement range serves as a guide for when recording with the camera
held horizontally. The range differs depending on the surrounding
environment.
0 We recommend using a maximum of three wireless flashes in each group.
0 If the subject is too close, communication light may affect the exposure.
You can reduce the effect by setting [Communication Light] to [LOW] or
lowering the output with a diffuser or similar device. (l 229)
A
B
C
5m
5m
7m
7m
50°50°
50°50°
30°30°
30°30°

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)