15. Wi-Fi/Bluetooth
420
Selecting Images
When sending by [Send Images Stored in the Camera], select the images
using the following procedure.
1
Select [Single Select] or [Multi Select].
2
Select the image.
[Single Select] setting
1
Press 21 to select an image.
2
Press or .
[Multi Select] setting
1
Press 3421 to select an image and
then press or . (Repeat this)
0
To cancel the setting, press or
again.
0 Images are displayed separately by card
slot.
To switch the card to display, press [ ].
0 Selecting images at once is possible only
for the images in a single card.
2
Press [DISP.] to execute.
6HW
2.
ュリヴヱハ
321
654
To Next Page
Loading...
