Panasonic Lumix DC-S1 User Manual

8. Metering/Exposure/ISO Sensitivity
180

Program Shift
You can change the shutter speed and aperture value combination set
automatically by the camera while maintaining the same exposure.
With this, you can, for example, make the background more defocused by
decreasing the aperture value or capture a moving subject more
dynamically by slowing the shutter speed.
1
Press the shutter button halfway.
0
This displays the aperture value and shutter speed value on the recording
screen. (Approx. 10 seconds)
2
Rotate or while the values are
displayed.
0
This displays the Program Shift icon A on
the recording screen.
3
Start recording.
Canceling Program Shift
– Set the camera on/off switch to [OFF].
– Rotate or until the Program Shift icon disappears.
0 Program Shift is not available when using the following functions:
–Flash
– [6K/4K PHOTO]/[Post-Focus]
0 You can customize dial operations:
[] ¨ [ ] ¨ [Dial Set.] ¨ [Assign Dial (F/SS)] (l 336)
0 The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[] ¨ [ ] ¨ [Expo.Meter] (l 344)
F5.630

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)