Panasonic Lumix DC-S1 User Manual

14. Menu Guide
340
[Monitor / Display] ¨ ¨
[Histogram]
[ON]/`[OFF]
This displays the histogram.
Turning this [ON] displays the histogram transition screen.
Press 3421 to set the position.
Positions can be moved to the diagonal directions using the
joystick.
0 You can also move the position by dragging the histogram
on the recording screen.
0 A histogram is a graph that displays
brightness along the horizontal axis,
and the number of pixels at each
brightness level on the vertical axis.
By looking at the distribution of the
graph, you can determine the current
exposure.
A Dark
B Bright
0 When the recorded image and the histogram do not match
each other under the following conditions, the histogram is
displayed in orange:
– During exposure compensation
– When the flash fires
– When the correct exposure is not achieved, such as in
low light situations.
0 The histogram is an approximation in the recording mode.
0 This menu item can be registered to the Fn button.
(l 279)

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)