17. Materials
477
When requesting a repair or transferring/disposing of the camera
0
After making a copy of personal information, be sure to delete information, including
personal information, such as wireless LAN connection settings that you have
registered or saved within the camera with [Reset]/[Delete account]. (l 76 , 425)
0 Reset the settings to protect the personal information. (l 76)
0 Remove the card from the camera.
0 Settings may return to factory default when camera is repaired.
0 Please contact the dealer where you purchased the camera or Panasonic if above
operations are not possible due to malfunction.
When transferring/disposing of the card, refer to “Points to remember
when disposing of/transferring the memory card” on page 476.
When uploading images to a web service
0
Images may contain information that can be used to identify the user, such as
recording dates and times, and location information.
Confirm details carefully before uploading images to a web service.
When not using the camera for a long period of time
0 Ensure you remove the battery and card from the camera.
When the battery is left inserted in the camera, a small amount of current will always
flow even if the camera is turned off.
If the battery is left in the camera, it may over-discharge, and be rendered unusable
even after charging.
0 Store the battery in a cool and dry place with a relatively stable temperature.
(Recommended temperature: 15 oC to 25 oC (59 oF to 77 oF); recommended
humidity: 40%RH to 60%RH)
0 If storing for a long period of time, it is recommended that the battery be charged
once per year, fully drained in the camera, then removed from the camera and then
stored again.
0 We recommend storing the camera with a desiccant (silica gel) when you keep it in a
closet or a cabinet.
0 Check all the parts before recording when you have not used the camera for a long
period of time.
To Next Page
Loading...
Need help?
General
