Panasonic Palmcoder PV-A16 User Manual

eq
o
Remove the Battery Compartment
lid and insert an AA size battery.
• Make sure polarities are aligned properly.
• When tape loading and unloading time
becomes longer than normal, battery
replacement is necessary.
2
JL
_oad Detector_
!iiiii!iiiiii_:ii:iiii_iiiii
1
Turn the Tape Wheel on the J_vHsr-',;J
cassette in the direction of the arrow to
take up any slack before placing the cassette
in the PlayPak.
Slide the RELEASE button to open the
PlayPak door.
3
Insert the V_Y_g-S[i]cassette with the window
facing up and to the left.
Gently close the PlayPak door.
• Let the Load Detector fully retract before
using the PlayPak in your standard VHS
VCR.
• Be sure the cassette reel area under the
PlayPak is free to turn while loading.
Slide RELEASE button and waitforlidto
open.
Hold the PlayPak securely in one hand.
Then push the cassette out through the
hole in the bottom of the PlayPak with your
finger and remove.
21

Panasonic Palmcoder PV-A16 Specifications

General

Brand	Panasonic
Model	Palmcoder PV-A16
Category	Camcorder
Language	English