26
1
No EVF '_
IndicationJ
,rmal (no display)
Use for continuous color balance in both
indoor and outdoor lighting situations. When
the AUTO LOCK switch is to "AUTO LOCK,"
or when there is no EVF indication, AUTO
White Balance is selected.
Use under the conditions described below.
AUTO LOCK_
Set the AUTO LOCK switch to "NORMAL."
WB
2
Press WHITE BALANCE
repeatedly to select one
of the following settings.
EVF Indication
Select" -_O._"OUTDOOR
when recordingoutdoor
scenes from indoors, or
outdoors with an amber
filter.
Select "_C_" INDOOR
when recordingindoor
scenes from outside, or
indoorswith a blue filter.
• White Balance is affected by Color
Temperature. Seethe chart on page 38.
Use when recording a subject that is darker
than the surrounding scene, in a shadowed
area or when the light source is in back of
your subject. Make sure the AUTO LOCK
switch is set to "NORMAL."
BACK LIGHT
1 c,
Press BACKLIGHT to obtain the desired
position while recording.
BACK LIGHT
(, ,)
Press until there is no display in the EVF
when lightingconditions return to normal.
To Next Page
Loading...
Need help?
General