Editing user settings
You can use the user setting edit
screen that is displayed when you
select "SETTING" during slide
playback on the previous page to add,
move and delete still images from the
list of images for slide playback and
also to change playback settings.
(_Use the &, V, <1 and I_ buttons
to move the cursor (I) to the
place where the image is to be
added or moved, and then press
the ENTER button.
Adding and moving images
You can select still imagesthat are
saved on the SD memory card and add
them to the user settings, and also
change the order of the still images
that have been selected in the user
settings.
(_Use the A, T, <1 and I_ buttons
to select the still images to be
added or moved, and then press
the ENTER button.
l 0 100-000l l/ll
• When moving images, only
images that have already been
added to the user settings can be
moved.
(_ Select "ADD" or "MOVE" and
then press the ENTER button.
EDIT
3. 0 100-0003. 3./13.
Repeat tt_eprocedure from step (_ to
add or move additional images.
See the following page for ]
details on how to change
settings and delete images.
SETTING
MOVE
DELETE
ENGL/SH-47
To Next Page
Loading...
