Panasonic PT-TX440

122 - ENGLISH
Class Command Control details
Parameter/
response
string
Remark
2 SNUM ? Serial number query xxxxxxxxx Returns serial number.
2 SVER ? Software version query xxxxxxxxx Returns version number.
2 INNM ? Input name query
COMPUTER1
COMPUTER2
VIDEO
HDMI1
HDMI2
MEMORY VIEWER
NETWORK
Returns input name.
2 IRES ?
Input signal resolution
query
AAAAxBBBB
AAAA: Horizontal resolution
BBBB: Vertical resolution
2 RRES ?
Recommended
resolution query
1280 x 800 For PT-TW380
1024 x 768 For PT-TX440 and PT-TX350
2 FILT ? Filter runtime inquiry xxxxx Returns the runtime of the lter.
2 RLMP ?
Lamp replacement
model number inquiry
ET-LAL510 Returns the Replacement Lamp Unit model number.
2 RFIL ?
Filter replacement model
number inquiry
ET-RFL300 Returns the Replacement Filter Unit model number.
2 SVOL Speaker volume
0 Decreases the volume.
1 Increases the volume.
2
FREZ Freeze control
0
1
Freeze function disabled
Freeze function enabled (freeze)
FREZ ? Freeze status query
2 LKUP Link up notication xx:xx:xx:xx:xx:xx
Noties the MAC address when the PJLink communication
becomes possible.
2 SRCH Projector search
ACKN=
xx:xx:xx:xx:xx:xx
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
PJLink security authentication
The PJLink password can be set from the [NETWORK] menu → [PJLink PASSWORD] (x page 83) or from the
[Set up passwords] page (x page 106) when accessing from the web.
The PJLink password is not essential for the PJLink control, which is available even the PJLink password is left
blank (factory default setting).
f For specications related to PJLink, refer to the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/
Chapter 7 Appendix - Technical Information