Panasonic PT-TX440 - [DISPLAY OPTION] Menu; [On-Screen Display]

ENGLISH - 65
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
[ON-SCREEN DISPLAY]
Set the on-screen display.
[INPUT GUIDE]
Set the input guide to be displayed when switching the input. The input guide screen shows the currently selected
input and input signal names.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DETAILED]
Displays the name of input terminal and input signal graphically.
[OFF]
Disables the input guide.
[SIMPLE]
Displays the name of input terminal and input signal.
Note
f When it is set to [DETAILED], you can select the input with asqw on the control panel or the remote control while the input guide is
displayed.
[OSD POSITION]
Set the position of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD POSITION].
4) Press qw to switch the item.
f The items will switch each time you press the button as following:
[CENTER] → [UPPER LEFT] → [UPPER RIGHT] → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] →
...
[WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
Chapter 4 Settings - [DISPLAY OPTION] menu