ENGLISH - 63
[FRAME LOCK]
(Only for still image signals input)
This setting is available for specic computer signals. Set when the movie is distorted.
1) Press as to select [FRAME LOCK].
2) Press qw or the <ENTER> button.
f The [FRAME LOCK] individual adjustment screen is displayed.
3) Press qw to switch the [FRAME LOCK].
f The items will switch each time you press the button.
[ON]
The frame is locked. Synchronizes the displayed image to the vertical scanning frequency of the input signal.
[OFF]
The frame lock function is turned off. Set to [OFF] if you are concerned about ickering.
Chapter 4 Settings - [POSITION] menu
To Next Page
Loading...
