24 - ENGLISH
12
8
13
1
14
1
Top
Bottom
Projection direction
12 Control panel and indicators
13 Lamp cover (x page 116)
The lamp unit is located inside.
14 Focus ring
Adjust the focus.
rControl panel and Indicators
INPUT
AV MUTE
VOL+
VOL-
1
3
4
2
4
5
8
6
7
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v Standby / b Power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
3 <INPUT> button
Displays the input source menu. (
Æ
page 41)
4 <VOL-> button / <VOL+> button
Adjusts the volume level of the built-in speaker or the
audio output. (
Æ
page 43)
5 asqw buttons
Selects an item in the menu screen, changes the setting,
and adjusts the level.
Also used to select characters in the menu screen.
The w button can be used as the ENTER button when it
does not function as a direction button.
6 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
7 <MENU> button
Displays or hides the main menu.
When the sub menu is displayed, pressing it will return to
the previous screen.
It can be used as ENTER button when the w button
functions as a direction button.
Used to turn off the audio and video temporarily.
(
Æ
page 43)
Note
f In this manual, the operating procedure of menu screen is described by assuming that the projector is operated with the remote control
instead of the control panel.
Chapter 1 Preparation - About your projector
To Next Page
Loading...
