Panasonic PT-TX440

52 - ENGLISH
[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] - 71
[COMPUTER1 INPUT SETTING] [RGB/YPBPR] 71
[COMPUTER2 SELECT] [COMPUTER2 IN] 71
[PROJECTOR ID] [ALL] 71
[INITIAL START UP] [LAST MEMORY] 72
[PROJECTION METHOD] [AUTO] 72
[HIGH ALTITUDE MODE] [OFF] 72
[LAMP POWER] [NORMAL] 73
[ECO MANAGEMENT] - 73
[EMULATE] [OFF] 74
[FUNCTION BUTTON] - 75
[AUDIO SETTING] - 75
[TEST PATTERN] - 75
[FILTER COUNTER] - 77
[INITIALIZE ALL] - 78
[SECURITY]
Sub-menu item Factory Default Page
[PASSWORD] [OFF] 79
[PASSWORD CHANGE] - 79
[TEXT DISPLAY] [OFF] 79
[TEXT CHANGE] - 80
[MENU LOCK] [OFF] 80
[MENU LOCK PASSWORD] - 80
[CONTROL DEVICE SETUP] - 80
[NETWORK]
Sub-menu item Factory default Page
[WIRED LAN] - 82
[PROJECTOR NAME] - 82
[ADMINISTRATOR ACCOUNT] - 83
[PJLink PASSWORD] - 83
[NETWORK CONTROL] - 84
[MEMORY VIEWER] - 84
[NETWORK STATUS] - 86
[INITIALIZE] - 86
Note
f Some items cannot be adjusted or some functions cannot be used depending on the signal that is input to the projector. The menu items
that cannot be adjusted or used are grayed out.
f Sub-menu items and factory default settings differ depending on the selected input.
Chapter 4 Settings - Menu Navigation