96 - ENGLISH
3) Enter the user name and the password.
4) Click [OK].
f The [Projector Control Window] page is displayed.
PT-TW380
Note
f If you use a web browser to control the projector, set the [NETWORK] menu → [NETWORK CONTROL] → [WEB CONTROL] to [ON]
(x page 84).
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled
properly if it is set with a browser that does not have this function enabled.
f If the screen for the web control is not displayed, consult your network administrator.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
f When the projector is already registered in the application software of “Multi Monitoring & Control Software” that uses the communication
control via LAN, communication with the projector will become impossible if the user name or password of administrator account is changed.
If the user name or password of administrator account is changed, update the registration information of the application software in use.
f About computer screen illustrations
The screen size and the display may differ from this manual depending on the OS, web browser or the type of computer you are using.
Chapter 5 Operation of Function - Web control function
To Next Page
Loading...
