Panasonic PT-TX440 - Page 98

98 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
6
9
7
8
1
2
3
4
5
11
12
10
13
14
PT-TW380
1 [PROJECTOR TYPE]
Displays the Model No. of the projector.
2 [MAIN VERSION]
Displays the  rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
5 [INPUT]
Displays the selected input.
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [AV MUTE]
Displays the status of the AV mute.
8 [VOLUME]
Displays the volume status.
9 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
10 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
11 [OPTICS MODULE TEMPERATURE]
Displays the status of the optics module temperature of the
projector.
12 [LAMP RUNTIME]
Displays the runtime of the luminous lamp (converted value).
13 [SELF TEST]
Displays the self-diagnosis information.
14 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display  eld of the [Projector status] screen, click
it to display the content of the error/warning.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
U13 Exhaust air temp. error
1
2
PT-TW380
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur. For the details of the display content, refer to
“[SELF TEST] display” (x page 119).
2 Error code
Chapter 5 Operation of Function - Web control function