Panasonic SC-CH7 - Maintenance and Troubleshooting; Maintenance Procedures

Maintenance
Head care __
To assure good sound quality for recording and playback, be sure
to clean the heads after approximately every 10 hours of use.
1. Switch the power of this unit to standby mode.
2. Press the eject button to open the cassette holder.
3. Clean the heads, pinch roller and the capstan shaft of each
deck with a cotton swab (or with a soft, lint>free cloth) slightly
moistened with alcohol.
Do not use any solution other than alcohol for head cleaning.
Head demagnetization |
In order to meuntain good sound quality during recording and
playback, it is recommended that the heads should be demagne¬
tized if distortion or poor sound quality persist after cleaning the
heads.
If the heads become magnetized, they could create noise in
recordings, loss of high-frequency response, or erasure of valuable
recordings. Several types of head demagnetizers are available and
may be purchased at local electronics supply stores. Follow the
instructions that are supplied with the device.
•Do not bring any type of metal objects or tools such as magnetic
screwdrivers in contact with the head assembly.
I Maintenance of external surfaces ]
To clean this unit, use a soft, dry cloth.
For very dirty surfaces, dip a soft cloth in a weak soap-and-water
solution and wring well. After cleaning, wipe v^h a soft, dry cloth.
Never use alcohol, paint thinner, benzine, or a chemically treated
cloth to clean this unit.
Such chemicals may damage the unit’s finish.
- 57 -