Panasonic SC-DP1 User Manual

11
RQT6815
Simple setup
This is a 12-hour clock.
1 Press [CLOCK/TIMER] to select the
clock.
Each time you press the button:
Clock> FPLAY> Original display
^________b
2 Within 10 seconds
Press [:,X] or [9,W] to set the
time.
The time display can be changed quickly by holding down
the buttons.
3 Press [CLOCK/TIMER] or [ENTER].
The time is set and the original display is restored.
To display the time when the unit is off
Press [SHIFT] r [DISPLAY].
The clock is shown for about 5 seconds.
Reset the clock regularly to maintain accuracy.
A demonstration of the display is shown in standby mode if you
have not set the clock.
You can reduce the power consumed in standby mode by turning
the demonstration off.
While the DEMO display is shown
Press and hold [–DEMO] until “DEMO
OFF” is displayed.
Each time you press and hold the button:
DEMO OFF
() DEMO ON
STEP7 Setting the time
TVÍ
TV/VIDEO
SETUP
PROGRAM
132
465
798
0
S 10
REPEAT
AUDIO
TU
N
E
R
/A
U
X
D
IR
E
C
T
NAVIGATOR
TOP MENU
M
E
NU
CANCEL
MUTING VOLUM
E
SUBTITLE
PLAY MODE
CLOCK/
TIMER
SLEEP
F PLAY
Í
P.MEMORY
TV VOL
r
TV VOLs
PAG E
ENTER
GUI DISP
DISPLAY
QUICK REPLAY ZOOM
SHIFT
SURROUND
CINEMA D.ENH SUBWOOFER
SOUND
SLOW/SEARCH
ANGLE
RETURN
TV
CH
X
TV
CH
W
X SKIP W
GROUP
DVD/CD
DISPLAY
SHIFT
1, 3
3
2
ENTER
PLAY LIST
DOUBLE
RE-MASTER
AM :
Turning DEMO off
PHONES
UPDOWN
AC IN
VOLUMETUNER/AUXDVD/CDPOWER
/
//
I
- DEMO
OPEN/CLOSE
ADVANCED
SURROUND
sDEMO
Í
DEMO OFF

Panasonic SC-DP1 Specifications

Amplifier Specifications

RMS Output Power (Low-channel)	25 W per channel (6 ≠)
RMS Output Power (High-channel)	25 W per channel (6 ≠)
Total Bi-Amp power	50 W per channel
Total RMS Stereo mode power	100 W
Total RMS Dolby Digital mode power	100 W
PMPO Output Power	1000 W
DIN Output Power (Low-channel)	20 W per channel (6 ≠)
DIN Output Power (High-channel)	20 W per channel (6 ≠)
Total DIN Power in Stereo mode	80 W
Total DIN Power in Dolby Digital mode	80 W
AUX Input sensitivity	250 mV
AUX Input impedance	19 k≠

FM Tuner Specifications

Frequency range	87.50–108.00 MHz (50-kHz step)
Sensitivity	2.5 µV (IHF)
S/N 26 dB	2.2 µV
Antenna terminals	75 ≠ (unbalanced)
Preset station	15

AM Tuner Specifications

Frequency range (UK, Europe, Russia)	522–1629 kHz (9-kHz steps)
Frequency range (Australia, N.Z., Southeast Asia)	522–1629 kHz (9-kHz steps)/520–1630 kHz (10-kHz steps)
Sensitivity	560 µV/m
Preset station	15

Speaker Specifications

Type	2 way, 2 speaker system
Tweeter	6 cm cone type 6 ≠
Woofer	10 cm cone type 6 ≠
Input power (High)	50 W (Music)
Input power (Low)	50 W (Music)
Output sound pressure level	81 dB/W (1.0 m)
Crossover frequency	2.2 kHz
Frequency range (16 dB)	47 Hz–32 kHz
Frequency range (10 dB)	64 Hz–31 kHz
Dimensions (WxHxD)	158k276k280 mm
Mass	2.4 kg

General Specifications

Power supply (UK, Australia, N.Z.)	AC 230–240 V, 50 Hz
Power supply (Europe, Russia)	AC 230 V, 50 Hz
Power supply (Southeast Asia except Thailand)	AC 230–240 V, 50/60 Hz
Power supply (Thailand)	AC 220 V, 50 Hz
Power consumption	105 W
Dimensions (WxHxD)	205k123.5k383.5 mm
Mass	4.2 kg
Power consumption in standby mode	1 W