31
RQT6815
Other functions
See page 30 for menu and option details.
Preparation
Press [1 DVD/CD].
(When a disc is in the tray, press [1 DVD/CD] and press [∫].)
1 Press [SETUP] to show the menus.
2 Press [2, 1] to select the menu’s tab.
The screen changes to display the menu.
3 Press [3, 4] to select the item you
want to change and press [ENTER].
4 Press [3, 4, 2, 1] to select the
option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1 Input a 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter a wrong number, press [SHIFT]i[CANCEL] to
erase it before you press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2 Press [ENTER] to confirm the 4 digits.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Change the settings when you have connected equipment through
this unit’s OPTICAL OUT terminal.
Select the maximum sampling frequency of PCM digital output.
Check the digital input limitations of the equipment you connect.
Off: When not connected digitally
Up to 48 kHz (factory preset):
Signals over 48 kHz converted to 48 or 44.1 kHz
Up to 96 kHz: Signals over 96 kHz converted to 48 or 44.1 kHz
Up to 192 kHz: Signals up to 192 kHz are output
[Note]
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz
irrespective of the setting.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment’s operating
instructions for details.
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels
of noise which can damage your hearing and the speakers.
Common procedures
Disc Video Audio Display Others
() () () ()
^------------------------------------------------------------------------------------------J
TVÍ
TV/VIDEO
SETUP
PROGRAM
132
465
798
0
S
10
REPEAT
AUDIO
TU
N
E
R
/A
U
X
D
IR
E
C
T
NAVIGATOR
TO
P M
ENU
PLAY LIST
M
ENU
CANCEL
MUTING
VOLUME
SUBTITLE
PLAY MODE
CLOCK/
TIMER
SLEEP
F
PLAY
Í
P.MEMORY
TV VOL
r
TV VOLs
PAG E
ENTER
GUI DISP
DISPLAY
QUICK REPLAY
ZOOM
SHIFT
SURROUND
CINEMA D.ENH
SUBWOOFER
SOUND
SLOW/SEARCH
ANGLE
RETURN
TV
CH
X
TV
CH
W
X SKIP W
GROUP
DVD/CD
132
465
798
0
S
10
ENTER
ENTER
CANCEL
SHIFT
DVD/CD
RETURN
SETUP
DOUBLE
RE-MASTER
Numbered
buttons
Entering a password (Ratings)
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
Digital output
PCM Digital Output
Dolby Digital and DTS Digital Surround
To Next Page
Loading...
Need help?
Amplifier Specifications
