15
Connections
PC Input Terminals connection
(Male)
RGB
Mini D-sub 15p
Stereo mini plug (M3)
Audio
Connect a cable which matches
the audio output terminal on the computer.
(Female)
COMPUTER
Conversion adapter
(if necessary)
Shared with DVI-D IN.
Notes:
Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical
lines.)
,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 ×
The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will
need to make setting changes to the computer at the time of connection.
Some PC models cannot be connected to the set.
There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.
Additional equipment and cables shown are not supplied with this set.
frequency range.
Signal Names for Mini D-sub 15P Connector
1
6 7 8
3
9
4 5
10
15 14 13 12 11
2
Pin Layout for PC Input
Terminal
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1
R
6
GND (Ground)
11
NC (not connected)
2
G
7
GND (Ground)
12
SDA
3
B
8
GND (Ground)
13
HD/SYNC
4
NC (not connected)
9
+5 V DC
14
VD
5
GND (Ground)
10
GND (Ground)
15
SCL