34
Screensaver
(For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
Screensaver
Start
Mode
OFF
PRESENT TIME MON 0 : 02
1/2
Signal
Input label
ECO Mode settings
Wobbling
Setup
Off
Component/RGB-in select
RGB
Screensaver
No activity power off
Disable
OSD Language English
(
UK
)
2
1
Press to display the Setup menu.
Press to select the Screensaver.
Press to select the Screensaver screen.
3
Mode selection
Press to select the
Mode.
Off
Interval
: Operates when Periodic Time and Operating
Time are set up and those times arrive.
Time Designation
: Operates when Start Time and Finish Time are
set up and those times arrive.
Standby after SCR Saver
: Operates while Screensaver duration, and display
enters standby mode.
On
: Operates when Start is selected and the ACTION
( ) button is pressed.
Press to select each
mode items.
Start setting
4
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Note:
When the display is turned off, the Screensaver will be deactivated.
To Next Page
Loading...
