Panasonic TH-42LF6W - Network Connection Setup

54
Using Network Function
Note:
Network function is disable during standby.
Network Connection
This unit has a network function to control the network connected display with your computer.
Note:
To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see
page 47)

Hub or broadband router
LAN cable
(not supplied)
COMPUTER
Notes:
 Make sure the broadband router or hub supports 100BASE-TX.
 Use a LAN cable that is compliant with “CAT5” or higher standards.
 

 For instructions on how to connect, consult your network administrator.