Panasonic TH-42LF6W - No Activity Power off

36
No activity power off
1/2
Signal
Input label
ECO Mode settings
Setup
Screensaver
Wobbling
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
No activity power off
Disable
Press to select the menu to adjust.
1
2
3
Press to select “Enable” or “Disable”.

When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the
Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
No activity power off
3min
Press any key to abort.
When the power is turned off due to this function, a message “Last turn off due to ‘No activity power off’.” is displayed

Note:
 During the screensaver is running, this function is disabled.