29
Picture Adjustments
1
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on
signal, input and menu setting.
Select to adjust each item.
2
Press the left or right button to switch between modes.
Normal
Cinema
Dynamic
Normal
For viewing in standard (evening lighting)
environments.
Dynamic
For viewing in brighter environments.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Note:
If you would like to change the picture and colour of the
selected Picture menu to something else, adjust using
the items in the Picture menu.
100
70
50
Picture
Normal
Normalise
Normal
Brightness
Picture Mode
Contrast
0
0
Tint
Colour
Backlight
Sharpness
50
White balance
Normal
FRAME CREATION
Max
Advanced settings
Press the left or right button to switch between modes.
Normal Warm Cool
FRAME CREATION
It is a function to look prettier fast moving scenes by
doubling the number of thumbnails displayed in the
picture.
Press the left
or right button to switch between modes.
Off Min Mid
Select “Off” if the image is unnatural.
The settings will stored in each input.
It does not return to the standard settings when you
choose the “Normalise” menu option.
Menu and image will disappear for a moment if you
change to another setting from the “Off” option as if it
was changed to off.
Advanced Settings
AGC
Gamma
Input level
Advanced settings
Normal
Normalise
W/B Low B
W/B High R
W/B Low R
W/B Low G
W/B High G
W/B High B
0
2.2
50
50
50
50
50
50
Off
Press to enter Advanced
Settings.
Helpful Hint: ( /
Normalise
Normalisation
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( )
button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
To Next Page
Loading...
