28
Adjusting Pos. /Size
H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position.
H-Size Adjust the horizontal size. V-Size Adjust the vertical size.
Clock Phase (During RGB and PC input signal)
Dot Clock (During RGB and PC input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this
happens, adjust so that any such noise is minimized.
Over Scan Turn image over scan On/Off.
525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, DVI, HDMI)
On Off
Notes:
“Off” is effective during only “16:9” aspect mode.
When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.
Mode
Adjusts the display size when 1125i or 1125p signal is input.
Notes:
“On” is effective during only “16:9” aspect mode.
Select On when you would like to replay 1920 × 1080 input signal.
Applicable input signal:
1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p
H-Size and V-Size cannot be adjusted when On is selected.
Off On
Helpful Hint: ( /
Normalise
Normalisation)
While the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the
ACTION (
are returned to the factory settings.
To Next Page
Loading...
