Panasonic TH-42LF6W - Component, RGB, YUV Signal Selection

42
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the COMPONENT/RGB IN terminal.
Y, P
B
, P
R
signals “Component”
RGB signals “RGB”
1/2
Signal
Input label
ECO Mode settings
Setup
Screensaver
Wobbling
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
No activity power off
Disable
Press to display the Setup menu.
1
2
3
Press to select the “Component / RGB-in select”.
Press to select the desired mode.
Component
RGB

Note:
 Make setting of the selected input terminal (COMPONENT/RGB IN).
YUV / RGB-in select
Select to match the signals from the source connected to DVI-D IN terminal.
YUV signals
“YUV”
RGB signals “RGB”
1/2
Signal
Input label
ECO Mode settings
Wobbling
Setup
Off
YUV/RGB-in select
RGB
Screensaver
No activity power off
Disable
OSD Language English
(
UK
)
Press to display the Setup menu.
1
2
3
Press to select the “YUV / RGB-in select”.
Press to select the desired mode.
YUV
RGB
