31
Sound Adjustment
Sound
Normal
Normalise
0
0
0
Off
Treble
Balance
Bass
Surround
Normal
Sound Mode
SPEAKERS
Output Select
1
Press to display the Sound menu.
2
Select to adjust each item.
3
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Item Details
Output Select
AUDIO OUT : Emits sound through the AUDIO OUT terminal.
Sound Mode
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear: Attenuates human voice.
Bass Adjusts low pitch sounds.
Treble Adjusts high pitch sound.
Balance Adjusts left and right volumes.
Surround Select On or Off.
Note:
When “AUDIO OUT” is selected, the items other than “Balance” cannot be adjusted.
Bass, Treble and Surround settings are memorized separately for each Sound Mode.
Helpful Hint: ( /
Normalise
Normalisation)
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
To Next Page
Loading...
