EasyManua.ls Logo

Panasonic TH-42LF6W - Network Functionality; Command Control and PJLink Protocol

Panasonic TH-42LF6W
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
Using Network Function
Command Control
Network function of the unit can control the unit in the same way as serial control from a network .
Supported commands
Commands used in the serial control are supported. (see page 17)
Note:
 Consult your local Panasonic dealer for detail instructions on command usage.
PJLink™ Protocol
The network function of the unit conforms with PJLink class 1 and you can operate the following actions from your
computer using PJLink protocol .
 Display setup
 Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
Command Control Remark
POWR Power control
Parameter
0 = Standby
POWR ? Power status query
Parameter
1 = Power “On”
INPT Input switch Parameter
See the parameter for command INST ?
INPT ? Input switch query
AVMT Shutter control Parameter
10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute)
20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
AVMT ? Shutter control query Parameter
11 = Picture Off (picture on mute)
21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
ERST ? Error status query Parameter
First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0

Meaning of the 0 – 2 settings:
0 = Error is not detected, 2 = Error
LAMP ? Lamp status query Not supported
INST ? Input switch list query Parameter
11: PC IN input (PC)
21: VIDEO IN input (VIDEO)
22: COMPONENT/RGB IN input
(Component)
31: HDMI1 input (HDMI1)
32: HDMI2 input (HDMI2)
33: DVI -D IN input (DVI)
34: 

NAME ? Projector name query Return the Display name contents selected in “Network Setup”.
INF1 ? Manufacturer name query Returns “Panasonic”
INF2 ? Model name query Returns “47LF6W” (For 47-inch LF6 model)
INFO ? Other information query Returns version number
CLSS ? Class information query Returns “1”
PJLink™ security authentication
Set “panasonic” for the PJLink™ password.
 PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.

Association website.
http://pjlink.jbmia.or.jp/

Table of Contents

Other manuals for Panasonic TH-42LF6W

Related product manuals