50
Options Adjustments
1/3
Options
Initial input
Onscreen display
Input Search
On
Off
Off
Off
0
0
Maximum VOL level
Initial VOL level
Off
Input lock
Off
Button lock
Off
Remocon User level
Off
Local Dimming
1/3
2/3
Options
Enable
Off-timer function
Normal
Initial Power Mode
0
ID select
Off
Remote ID
Off
Serial ID
---
Serial Daisy Chain
Off
Studio W/B
Protocol 1
LAN Control Protocol
RS-232C/LAN Information Timing
2/3
3/3
Options
Off
Clock Display
Off
Power ON Screen Delay
Function button assign 1
Power On Message (No activity power off)
On
DIGITAL LINK
Function button assign 2
Signal
1
Press to display the Setup menu.
4
Press to select your preferred menu.
5
2
Press to select “OSD Language”.
3
Press to select “Options”.
Shipping
Display Serial Number
Options
Press for more than 3 seconds.
Press to display the Options menu.
Press to adjust the menu.
The serial number of this device is displayed when “Display Serial Number” is selected in step 3.
Item Adjustments
Input Search Set auto input switching for when there is no signal. (see page 52)
On screen display
On: Displays all the following on screen.
was pressed.
Off: Hides all the items above from view.
Initial input
Adjusts the input signal when the unit is turned on.
Off
VIDEO Component/RGB PC DVI HDMI1 HDMI2 Off
Notes:
Initial VOL level
Press button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Press
Off
On
Off:
On:
Notes:
To Next Page
Loading...
