58
Using Web Browser Control
TOP screen structure of the Web browser control
After logging in, the TOP screen of the Web browser control is displayed.
Menu
Menu items are displayed. When a button is clicked,
setup screen of each item is displayed.
Item Details
BASIC
CONTROL
BASIC CONTROL screen is displayed.
(see below)
OPTION
CONTROL
OPTION CONTROL screen is displayed.
(see below)
SETTING
Network Setup screen is displayed.
(see page 59)
CHANGE
PASSWORD
Password setup screen is displayed.
(see page 59)
Crestron
Connected™
The Crestron Connected™ operations
screen will appear. (see pages 60, 61)
This button does not appear when
“Crestron Connected™” in “Network
Setup” is “Off”.
(see page 47)
2
1
3
According to the selected item from the menu, setup
status or set items are displayed.
Network ID information
ID to identify the unit is displayed.
Display Control
(BASIC CONTROL/OPTION CONTROL Screen)
Click BASIC CONTROL or OPTION CONTROL from the menu. Various controls of the unit can be set.
BASIC CONTROL screen
Click BASIC CONTROL from the menu. Unit status and
buttons to change settings are displayed.
Item Details
POWER
ON: (not supported)
OFF: Turn of the display
INPUT SELECT
Switch the input signals. Displayed
buttons vary according to the
connection status of the video device.
AUDIO MUTE Switch ON/OFF of the sound mute.
ASPECT Switch the screen modes
OPTION CONTROL screen
Click OPTION CONTROL from the menu. Command
Item Details
COMMAND
Enter a command. Use the same
command used for the serial control.
(see page 17)
RESPONSE Response from the unit is displayed.
SEND Command is sent and run.
Note:
After the settings are changed, it may take a while till
the display’s response is displayed.
To Next Page
Loading...
