Panasonic TH-42LF6W - Page 49

49
Network Setup



 .
DIGITAL LINK status
LINK status
HDMI status
Signal quality
Min
Max
No link
No HDMI
-XX dB
-YY dB
 
No link : No LAN connection, etc.


HDMI status Either “No HDMI”, “HDMI ON”, or “HDCP ON” will be displayed.



Signal quality 
colours are red, yellow, or green, depending on the number.
The number is represented by yellow or red if the LAN cable is disconnected or the cable is

connected and the display.
Signal Quality Display Colours Reception Status
-12dB or below Green The reception is normal
-11 to -8dB Yellow Part of the received
data is corrupted
-7dB or above Red There are reception




is
pressed.
Note:
 
to a LAN terminal and its power is on.