Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-13
.
“ENTER FWD EXT#” appears on the display.
4. Enter the number of the extension you want to receive your calls.
5. Press the
ON/OFF
key.
• The
DND/CF
LED lights.
• “FWD-EXT 135” appears on the 2nd line of the display if extension
135 is selected. If a name is assigned to the extension, the name appears
instead of the extension number.
To activate Call Forwarding-External (prior to Version 7.0):
Note:
To forward to an outside number, the trunk selection and
forwarding number must first be programmed into personal or system
speed dialing. With CPC-A or CPC-B Versions prior to 2.0, you can only
forward to an outside number that is programmed into personal speed dial
number 99. With CPC-AII and CPC-B 2.0 or higher, you can forward to
any speed dial number (system or personal). See “Speed Dialing” on page
4-88 for more information on programming personal speed dial numbers.
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
•The
ON/OFF
LED lights.
2. Dial “72.”
“ENTER FWD CODE” appears on the display.
3. Dial 723.
“ENTER FWD EXT#” appears on the display.
4. Press
AUTO
plus the appropriate speed dial number.
5. Press the
ON/OFF
key.
Call Forward Type Code
All 0
Busy/no answer 1
Busy 2
No answer 4
To Next Page
Loading...
