Chapter 4. Key Telephone Features Section 700 - Operation
4-14 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
• The
DND/CF
LED lights.
• “FWD OUTSIDE” appears on the 2nd line of the display .
To activate Call Forwarding to an outside number (CPC-AII/CPC-B
Version 7.0 or higher):
Note:
To forward to an outside number, the trunk selection and
forwarding number must first be programmed into personal or system
speed dialing. You can forward to any speed dial bin number (system or
personal). See “Speed Dialing” on page 4-88 for more information on
programming personal speed dial numbers.
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
•The
ON/OFF
LED lights.
2. Dial “72.”
“ENTER FWD CODE” appears on the display.
3. Dial the appropriate call forwarding code.
“ENTER FWD EXT#” appears on the display.
4. Press
AUTO
plus the appropriate speed dial number.
5. Press the
ON/OFF
key.
• The
DND/CF
LED lights.
• “FWD OS AXXX” appears on the 2nd line of the display where XXX
is the Speed Dial bin number.
To cancel Call Forwarding
1. Press
ON/OFF
.
2. Dial “72.”
Call Forward Type Code
All 0
Busy/no answer 1
Busy 2
No answer 4
To Next Page
Loading...
