P-49
PROGRAMMING (MODE 6)
MODE 6 (Flexible Function Key Assignments)
When all of the telephone operation conditions required by the user are satisfied by the content of the eight telephone
styles set in MODE 3, MODE 6 need not be set.
The following functions can be registered to FF keys to perform each function with one-touch operation. Up to 4-digit
dial number can be registered to each FF key.
NOTE : To delete the input data, press FF5 key, to input “#”, use FF2 key, and to input “ ”, use FF1 key.
Flexible Function (FF) Key Assignments Table
Any of the following (four digits max.) can be assigned to FF keys:
FEATURE OPERATION REMARKS
Absence Message Setting [71] [n] (XXXX) n=Message Code (0-9)
XXXX=Returning Time (0000-2359)
Absence Message Cancellation [71]
Answer to Paging [69]
Batch Output of Programming Data [#97] (XXXXn) XXXX=ID code (0000-9999)
n = Output code (0-4)
BGM (On/Off) [#53]
Call Forward Setting (All calls) [721] (nn) nn=Extension No. (10-25)
Call Forward Setting (No Answer) [725] (nn) nn=Extension No. (10-25)
Call Forward Setting (No Answer/Busy) [722] (nn) nn=Extension No. (10-25)
Call Forward Setting (On Busy) [723] (nn) nn=Extension No. (10-25)
Call Forward Setting (Exchange Line) [724]
Call Forward Cancellation [72]
Call Forward Confirmation [ 72]
Call Logging [#93] Available only with the administrator's phone.
Call Wait [3]
Change ID Code of Station Lock Out [74] (XXXXYYYY)
XXXX=Old ID Code for Station Lock Out (0000-9999)
YYYY=New ID Code for Station Lock Out (0000-9999)
Direct Call Pick-up [7 ] [nn] nn=Extension No.
DND Setting/Cancellation [73]
Door Opener A [54]
Door Opener B [55]
Door Opener A/B [53] Available when talking through a doorphone.
Doorphone A Call [51]
Doorphone B Call [52]
Exchange Line [88n] n=Exchange Line Number (1-4)
Follow Me Setting [77] (nnmm)
Follow Me Cancellation [77] (nn) nn = Transfer source extension No. (10-25)
Follow Me Cancellation from operator [77 ] (nnmm) mm = Transfer target extension No. (10-25)
or administrator
Follow Me Confirmation [ 77]
Follow Me Confirmation from operator [ 77] (nn) nn=Extension No. (10-25)
Group Call Pick-up [70]
Headset Mode(Setting/Cancellation) [#51]
INT Call Back with CW [6]
Intercom call [10] - [25] 10-25 = Extension No.
Line Group Dial [9] or [nnn] nnn=Group No. (811-813)
Lunch Mode (Setting/Cancellation) [#54] Available only with the operator’s phone or
administrator's phone.
Message Wait [2]
Message Wait Cancellation [792]
Message Wait Confirmation [ 79]
Message Wait with Call Back [791]
Automatic Mode Switching Cancellation [#55] Available only with the operator’s phone or
(Holiday Night Mode Setting) administrator's phone.
Day/Night Mode Switching (Day/Night) [#52] Available only with the operator’s phone or
administrator's phone.
Operator Call [0]
Paging (All Groups) [60]
Paging (Group 1) [61]
Paging (Group 2) [62]
Paging (Group 3 & External Paging) [63]
Programming Mode [MEMORY ##] (ONE-TOUCH) Available only with the administrator's phone.
Save Dial Assignment [MEMORY 9 ]
Save Dial Call [MEMORY ]
Save Dial Confirmation [ MEMORY ]
SSD Call
[MEMORY nn]
or
[MEMORY nnn]
nn or nnn=SSD No. (00-89) or (000-199)
Station Lock Out Setting/Cancellation [74] (XXXX) XXXX=ID Code for Station Lock Out (0000-9999)
Tone/Voice Call Switching [1]
Trunk Queuing [6]
DISA Message recording (1st message) [ 981]
DISA Message recording (2nd message) [ 982]
DISA Confirmation of Recording (1st message)
[ 971]
DISA Confirmation of Recording (2nd message)
[ 972]
DISA Registration of reception extension [ 99] (nmm) n = Registration code (0-9)
No./DISA speed-dial mm = Extention Number (10-25)
NOTE [ ] : One procedure in the operation ( ) : Can not be assigned though necessary in operation
To Next Page
Loading...
