O-39
Assignment
1 4 5 6 732
KEY FEATURE
[0]-[9] Dial numbers
[ ], [#] Converts the following entries to DTMF signals.
[REDIAL] Pause insertion
[MEMORY] [00]-[89] Assigns an SSD code.
[ONE-TOUCH-1] Characters entered between this key will not be displayed on LCD.
1 432
FF
1 4 532
ONE-TOUCH Key (Personal Speed Dial) .......................................
You can assign up to 10 frequently dialed telephone numbers to ONE-TOUCH keys. The number of digits
assigned to a ONE-TOUCH key must be no more than 24. Numbers assigned to ONE-TOUCH keys are
automatically assigned to corresponding PSD codes.
• To assign a number to a ONE-TOUCH Key for key telephone
ON
/
OFF
MEMORY
1
3
4
6
5
2
0
7
9
8
1
3
4
6
5
2
0
7
9
8
HOLD
ON
/
OFF
ONE-TOUCH Key Exchange line Number to Assign To store
Access Number
(9, 811-813)
To Repeat
If you want to assign another ONE-TOUCH key, repeat the procedure 2 to 6 (do not press ON/OFF key).
SLT
See User Guide (SLT).
Keys Available for One-Touch Dial Assignment
PSD Codes and ONE-TOUCH Keys
PSD codes (90-99) correspond to ONE-TOUCH keys (1-10). The left most ONE-TOUCH key in the lower row
represents No.1, and the right most ONE-TOUCH key in the upper row represents No.10.
• To confirm a number assigned to a ONE-TOUCH Key (Telephones with
LCD Only)
ON
/
OFF ON
/
OFF
or [CONF] key ONE-TOUCH key To finish
• To cancel a number assigned to a ONE-TOUCH Key
ON
/
OFF
MEMORY
HOLD
ON
/
OFF
ONE-TOUCH key
* By assigning a new number, the original number will be erased automatically.
To Next Page