15
The KTC Remote Control
You can access all the KTC’s features in both TV and DPF mode by using the remote control. (Install the two
AAA batteries before attempting to use the Remote control; refer to page 16.)
TIP: Throughout this User Guide, (RC) is noted next to instructions referencing specific use of
the remote control.
1. POWER – Turns the KTC on or off.
2. 0~9 – (TV) Sets the channels.
3. Dash (-) – (TV) Inserts the dash for selecting
digital channels directly.
4. MUTE – (TV) Mutes the TV’s audio.
5. CH(+) / CH(-) – (TV) Channel up and down.
Also Scroll Up/Down through Menu option
settings.
(DPF) Functions as Photo Select and
Unselect.
VOL(-) / VOL(+) – (TV and DPF) Volume up
and down. Also Scroll Left/Right through
Menu options.
6. EXIT – (TV) Exits the menu, returns to the
previous screen, or cancels the current
operation.
7. EXIT – (DPF) Exits the menu, returns to the
previous screen, or cancels the operation.
8. ▲/▼/◄/► – (DPF) Moves the item or menu
highlight up, down, to the left or to the right.
9. ZOOM – (DPF) Zoom the current view of the
photo. In the zooming state, left/right and
up/down buttons are used for panning and tilting
of the photo.
10. ROTATE – (DPF) Rotate picture by 90 degrees.
11. SLEEP – Reserved (Not currently used)
12. FAV.CH – (TV) Display your favorite channel list
and select channel to view.
(Refer to page 32 for Favorite list setup instructions.)
13. CC – (TV) Cycles between the Closed
Captioning modes while watching TV.
14. MTS – (TV) Selects stereo, mono, or second
audio programming.
15. SOURCE – Select the sources of the KTC (TV,
AV, S-Video, Component, DPF, HDMI, and PC)
16. RETURN – (TV) Returns to the previously
watched channel.
17. MENU – (TV) Activates the OSD menu. If a sub-
menu is active, pressing this button will return
selection to the previous menu level.
18. ENTER – (TV) Changes channels in conjunction
with number pad. Also functions as the ENTER
button for selecting options on OSD.
19. DISPLAY – (TV) View the current channel
information.
(Refer to page 33 for more information.)
20. SETUP – (DPF) Display the on-screen setup
menus.
21. ENTER – (DPF) Select or confirm an action.
22. SLIDE SHOW – (DPF) Play slideshow of photos
on selected memory source.
23. FUNCTION KEY. F1 / F2 / F3 – Reserved (Not
currently used)
24. S.MODE – (TV) Cycles through sound modes
(Standard, Music, Movie, Speech, Custom)
25. P.MODE – (TV) Cycles through picture effect
modes (Standard, Vivid, Mild, Custom)
26. EPG – (TV) Display Electronic Program Guide
27. ASPECT – Selects different screen size
Use for
TV
functions
Use for
DPF
functions
Use for
TV
functions
To Next Page
Loading...
Need help?
General