52
Set the Clock and Date
(PT)
1. With the HOME screen displayed, touch SETUP.
2. Use the arrows to highlight Set Time, and then touch SELECT.
3. Use the arrows to change the field value, and touch NEXT to scroll through the fields.
4. When all fields are correct, touch SET.
5. Touch BACK to return to the HOME screen.
(RC)
1. With the CLOCK/CALENDAR screen displayed, press SETUP.
2. Use the arrows to highlight Set Clock and then press ENTER.
3. Use ◄ / ► to move between the Time and Date fields, and use ▲ / ▼ to change the value in the
selected field.
4. When the date and time are correct, press ENTER to save and return to the normal
CLOCK/CALENDAR screen.
Set the Alarm
You can use your KTC as an alarm clock, and you can set the alert as either a built-in tone or music. You
can also set the alarm to alert only once or daily.
CAUTION: After setting the alarm, the CLOCK/CALENDAR screen must be displayed for the alarm
feature to activate. If any other screen is displayed during the ‘alarm set’ time, the alarm
will not activate.
(PT)
1. With the HOME screen displayed, touch SETUP.
2. Use the arrows to highlight Set Alarm, and then touch SELECT.
3. Use the arrows to change the field value, and touch NEXT to scroll through the fields.
4. When the alarm is set as desired, touch SET to save.
To Next Page
Loading...
Need help?
General