61
Set DPF Manager Window Preferences
There are several settings for customizing your DPF Manager window as desired. Right-click
anywhere within the DPF Manager thumbnails window (not on an image) and then select Widget
Preferences….
The DPF Manager Options window will open with the following setting choices:
Scan
Interval – Number of seconds allowed for a successful connection with a Pandigital unit. If the
PC and Pandigital unit do not successfully connect within the allotted number of
seconds, the DPF Manager will timeout.
Number – The number of automatic connect attempts with a Pandigital unit; if connection is not
made within the allotted number of attempts, the PC will not re-try to connect until you
click the unit name in the Dock window again.
Display
Icon Size – Choose your preferred size of the unit icon in the Dock window:
Highlight Colour – Choose the desired color for the highlighter when you position the cursor
over a unit name in the Dock window.
View Type – Choose how the unit name will be displayed in the Dock window:
Test only – Icon & Text – Icon only
Dock
Dock Location – Choose the desired location for the Dock window to be displayed:
Left – Top - Right
Window Width and Height – Use the sliding size indicators to adjust the width and height of the
Dock window.
Dock Sensitivity – Use the sliding scale indicator to adjust the sensitivity of the dock/undock
actions.
Reset doc position – Select to reset the default position of the widget (left, middle)
Font
Name and Colour – Choose the desired font type and color for the unit name(s) when displayed
in the Dock window
Shadow Effect – Select if you prefer the unit name(s) displayed with a shadow effect
Shadow Colour – If you select Shadow Effect, you can also select the desired shadow color
Window
Window Level – Choose the desired window layering position of the Dock window:
Keep on top of all other windows – Normal – Keep below all other windows
To Next Page
Loading...
Need help?
General