59
1. Download and install the Pandigital DPF Manager Widget from http://pandigital.net
. Go to the
Support page and then the Downloads tab.
2. After you have downloaded and installed both widgets, click on the Yahoo Widget Engine setup icon.
3. Select Open Widget….
4. Select the downloaded Pandigital DPF Manager Widget file and click OPEN.
5. Click Use Widget.
6. If the installation is successful, the DPF Manager Dock will appear on your desktop.
7. Right-click in the DPF Manager box to show the application menu; select Add DPF to add a unit.
8. Enter a Name for the unit (you choose any name as desired), and the wireless network IP address,
and then click Add.
Note: If you have multiple Pandigital units to add, repeat steps 7&8 for each device.
9. Click on the name of a unit listed in the DPF Manager window to connect with your PC. The
thumbnails of the images stored in the internal memory will be displayed.
To Next Page
Loading...
Need help?
General