Parameter Reference 15-13
AC10 Inverter
wrong
24: Communication timeout (CE)
45: Communication Timeout (CE)
Fault Frequency of The Latest Malfunction
Fault Current of The Latest Malfunction
Fault PN Voltage of The Latest Malfunction
Fault Frequency of Last Malfunction but One
F715 Fault Current of Last Malfunction but One
F716 Fault PN Voltage of Last Malfunction but One
F717 Fault Frequency of Last Malfunction but Two
F718 Fault Current of Last Malfunction but Two
F719 Fault PN Voltage of Last Malfunction but Two
F720
Record of Overcurrent Protection Fault
Times
F721
Record of Overvoltage Protection Fault
Times
F722 Record of Overheat Protection Fault Times
F723 Record of Overload Protection Fault Times
F724 Input Phase Loss
0: invalid;
1: valid
1
○╳
F725 Reserved
F726 Overheat
0: invalid;
1: valid
1
○╳
F727 Output Phase Loss
0: invalid;
1: valid
0 ○
F728 Input Phase Loss Filtering Constant
0.1～60.0
5.0 √
F730 Overheat Protection Filtering Constant
0.1～60.0
5.0 √
F732
Voltage Threshold of Under-voltage
Protection
0~450
Subject to
inverter
model
○
F737 Over-current 1 Protection
0: Invalid
1:Valid
0
F738 Over-current 1 Protection Coefficient
0.50～3.00
2.50
F739 Over-current 1 Protection Record
F740 Reserved
F741 Analog Disconnected Protection
0: Invalid
1: Stop and AErr displays.
2: Stop and AErr is not displayed.
3: Inverter runs at the min frequency.
4: Reserved.
0 √
TC-Hydraulik - Rsdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - l.lornsen@tc-hydraulik.de - www.tc-hydraulik.de
To Next Page
Loading...
Need help?
General
