2 Tap on the desired template.
Ä Further information on the template is displayed.
INFORMATION
The amount of information displayed depends on the measurement method
(Start/Stop, Datalogger) and the channels and sensors used in the tem-
plate.
Fig.41 Templates, information
3 Tap on the button to load the template.
Ä The sensors currently connected are compared with the measuring
template and the status is displayed in color:
Red: The connected sensor does not match the loaded sensor
(e.g. incorrect physical unit, measuring range exceeded, CAN identity
field does not match)
Green: The connected sensor matches the loaded sensor (e.g. unit
and range match)
Gray: A channel is connected that is not saved in the measuring tem-
plate
65
The Parker Service Master COMPACT V1.0/02/24
Settings
To Next Page
Loading...
