Fig.42 File manager, edit template
4 Tap on the button to adopt the template for the next measurement.
Ä The measuring template is adopted regardless of the status of the indi-
vidual sensors.
If the status of a sensor is red, this channel is not loaded.
If the status of a sensor is gray (new sensor), this sensor is placed at
the end of the channel list and switched to inactive.
Activate the sensor in the Edit Channels menu if necessary, refer to
Chapter & „Options: Edit Channels in the Measurement View (Edit
Channels)“ on Page41.
66
The Parker Service Master COMPACT V1.0/02/24
Settings
To Next Page
Loading...
